[Materials n=name w=width t=thickness l=routed thickness]
[Feedrates f=dovetail routing a=arc (nose) c=cutoff m=miter feedrate]
[Passes    p=cutoff o=miter offset v=miter d=drill]
material=n"2x10 Pine"   w9.25  t1.5  l1    f400 a100 c300 m200 p2 o0 v2 d2
material=n"2x12 Pine"   w11.25 t1.5  l1    f400 c300 m200 p2 o2 v3
material=n"5/4x10 Pine" w9.25  t1.0  l.625 f200 c150 m200 p2 o2 v3
material=n"5/4x10 Oak"  w9.25  t1.0  l.625 f200 c150 m200 p2 o2 v3
material=n"5/4x12 Pine" w11.25 t1.0  l.625 f200 c150 m200 p2 o2 v3
material=n"5/4x12 Oak"  w11.25 t1.0  l.625 f200 c150 m200 p2 o2 v3
material=n"1x10 LVL"    w9.25  t1.0  l.625 f200 c150 m200 p2 o2 v3
material=n"1x12 LVL"    w11.25 t1.0  l.625 f200 c150 m200 p2 o2 v3
material=n"2x12 Oak"    w11.25 t1.75 l1    f200 c150 m200 p3 o2 v3

[Pins - Enter Y axis position and spacing]
[f=first b=base(2nd pin) s=spacing]
pins=f1b30s24

[Fixtures]
[n=name x=x fence u=u fence y=y extra space z=z height w=w height]
[l=head to use for left stringer (0=z 1=w)
[r=head to use for right stringer (0=z 1=w)
fixture=n"Left"    x0      u30     y2 z.1 w.1 l0 l0
fixture=n"Right"   x30.5   u60.5   y0 z.2 w.2 l1 r1
fixture=n"Outside" x0      u60.5   y0 l0 r1

[Bits]
[d=diameter t=tool# a=dovetail angle]
boxroute=d.875 a7 t1    
cutoff=d.500 t2         
openriseroute=d.500 t2  
miter=d.5 t4
drill=d-.1              [d=depth to drill]

[Box Stringers]
[t=tread thickness g=tread gap j=riser gap]
[s=solid riser thickness p=ply riser thickness]
[r=relief (edge to nose) o=offset (face cutoff to bottom riser)]
[n=nose overhange w=wedge angle m=mode (m0=drill m1=no drill)] 
box=t1.0 j.1 g.25 p.5 s.75 r1.25 o2.5 n1.063 w3

[Open Rise Stringer]
[t=tread thickness n=nose overhang o=offset (face cutoff to bottom riser)]
openrise=t1.5 n1.25 o2.5

[Cut Info]
clearance=2.5              [Z Clearance For Rapid Moves]

[Output Directory]
path=c:\bobcad             [Path for .TAP]